In love with your Kiln?
I am looking to purchase my first kiln...I am a beginner lampworker so any information would be so very helpful and appreciated!!
Are you in love with kiln and why?? |
Glasshive... Look no further. Beautifully built, quality kiln with great customer service. I live in a coastal area where salt plays havoc on tools and equipment. I've had my kiln for 3-4 years and it looks practically brand new. Customer service is top notch. I'm a bit of a button pusher and I managed to reprogram my kiln. On an overseas call, Pam took me step by step to reset the program.
There are several recent threads on this subject so I suggest you do a search and you will find many many happy lampworkers using Glasshive products. |
Glasshive is the way to go. You will never need another kiln.
|
absolutely Glasshive. they are beautifully made, easy to use and the customer service is best around.
|
Oh yeah,,,glass hive .. Love mine!
|
Another Glass Hive user here. Customer service is the best and the kilns are top notch. I do not 'love' my kiln, but that's only because it is too small. I bought a short guy several years ago when I could only do a couple of beads at a sitting. Now I am frustrated by how fast my kiln gets too full!
Sheralyn |
I have a Jen Ken, had it for about five years. http://jenkenkilns.com/af3p-119w4flipdoor.aspx
I've never had a single problems with it, huge space in the interior and I don't really know what their customer support is like b/c I've never had to call them to find out. |
I have an AIM kiln that I bought before I had a clue - hadn't even discoverd LE yet, so hadn't had the benefit of the resources here. Thankfully, I did well, especially given that I had no clue what I was doing, it meets all my current and projected needs, and it hasn't given me a bit of trouble.
But if I HAD been here first? I'd have a Glasshive, for the customer support alone! Having someone you KNOW you can reach out to and get answers? Priceless! |
Paragon SC2. I love it because it has the following features and will last me through many phases of glass and other kiln projects:
bead door bigger, main door for sculptural stuff several built in programs, including for metal clay 4 customizable programs vent at the top for metal clay window for peeking if trying to kiln strike 120V (normal household voltage) solid construction, very durable |
I have the same Jen Ken as bshelle and have also had no problems in about 5 years, however, after spending time in LE and reading about their support, if I were ever in need of a new kiln I would go Glasshive, also.
Georgia |
I have a Paragon SC3 it's just a little bigger than the SC2, my next kiln will be a Glass Hive. Biggest disadvantage to the SC3 is the punty door. You can use the punty door or the main door but not both at the same time. The main door is a swing out door like a house door, if you have something in the punty door it will sweep your kiln out.
|
I highly recommend Glasshive as well, but I have also had a Jen Ken bead annealer for the past several years and it was great for me as a beginner. The only reason I upgraded was because of space.
If you're on a budget, I would look for a Jen Ken used. I would say to look for a glasshive used, but you would have to pry it from folks' cold dead fingers. |
Arrowsprings makes a great kiln, too.
|
Thank you everyone for all of your input!! This has been very helpful, since I am such a newbie, kilns are something that I do not know anything about. So with everything else in the lampworking world, I am trying to learn and make the best purchasing decisions about equipment and tools. I greatly appreciate all of the input!
|
Paragon Bluebird XL, had it shipped to Bermuda 3 years ago, never had a problem with it. Double doors so lots of space too.
|
I love Arrowsprings kilns. They have great customer service too. Craig is very patient and will walk you through programing. I think they are comparable to Glasshive, you might check out size and features and price to help make up your mind.
If you get a brick kiln, you can just turn it off 30-1 hour after you are done making beads and let it "ramp down" without a program. That might help you get a less expensive controller. But I'm not sure. |
First I had a Paragon SC-3, but as DragonHarper said it's hard to open the main door if you have mandrels hanging out the bead door. It's also small. I later got a GlassHive and use that always! Love it!!
Judy |
Thank you so much everyone...all good things to consider...such a decision!
|
I know you're overflowing with good advice, but let me put in one plug for my Skutt GM10F. It's a firebrick kiln, the quartz elements are shielded behind a wall so I don't accidentally poke a mandrel into them, and it's got a 9" cubic firebox.
Here's a link: http://www.skutt.com/glass/products/beadkiln.php Good luck! Nolly |
AIM kiln user here... love it, the size is perfect, I can anneal and then slump or fuse without issue.
|
Got my Glass Hive Regular Guy last summer, and I absolutely adore it! :love:
|
I bought a used Glass Hive Regular Guy a few weeks ago. Ran it for the first time last weekend.....I love it!
My one piece of advice is to make sure you get one with a digitial controller. I batch annealed in a kiln without a digitial controller while I was saving money and it sucked! |
Quote:
|
I have a regular guy and love it! I can get a massive amount of beads in the regular guy.
|
Quote:
|
Quote:
|
All times are GMT -7. The time now is 2:37am. |
Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.