Lampwork Etc. - Mini CC with NG and an M-15 Oxycon....

Lampwork Etc. (http://www.lampworketc.com/forums/index.php)

- Torch Questions (http://www.lampworketc.com/forums/forumdisplay.php?f=55)

- - Mini CC with NG and an M-15 Oxycon.... (http://www.lampworketc.com/forums/showthread.php?t=268643)

GlassTorturer

2014-08-09 9:09am

Mini CC with NG and an M-15 Oxycon....

Could this combo melt boro effectively? I'd like to take a class, but am hesitant if my own set up can't really do the job once I'm back home. I can't get tanked Oxygen into my basement where my studio is, and I'm already set up with household natural gas. Thanks for your thoughts!

Judy

Dale M.

2014-08-11 7:07am

Place oxygen tanks in cabinet at "ground level" and pipe oxygen into basement.... Two things about piping oxygen, you can use a rubber hose (welding), or hard pipe as long as hard piping contains ON OILS.... Hard piping can simple be cleaned soft copper tubing same as used in refrigeration....

Dale

Hammer

2014-08-12 2:45pm

Quote:

Originally Posted by Dale M. (Post 4636245)

Dale, should the oxygen cabinet be vented? I was thinking about using one of those rubber made vertical storage sheds for my oxygen tank outside. Should holes be drilled for ventilation?

Dale M.

2014-08-15 6:24am

Oxygen is not hazardous, does not demand to be vented (fuel? -YES)... You can vent cabinet if you so desire, some air flow may keep temperatures down some if cabinet is in the sun in hot weather...

Dale

toothpayne

2014-11-13 7:45pm

The Mini CC (which requires 7 LPM) will play very well with the EX-15 which produces 8 LPM @ 15 PSI. As a matter of fact we like this combination so much we have it on sale.

All times are GMT -7. The time now is 4:52am.