What went wrong?!?!?
We had a fire. It appears that the hose connected to my torch melted at the connector to the torch and blew off. I jumped back quickly enough, but there was flame spewing out of the end of the hose. I was able to put the fire out relatively quickly with the fire extinguisher and sent my husband outside to turn off the tank. When I was working on my torch last night I noticed the valve knob was hot, but I didn't think it was THAT hot, and today the hose melted, and I had a fire.
Ok, so is this a one-in-a-million chance or does this sort of thing happen often?!? |
OMG.. so glad you are safe, that could have been really bad
|
Can you describe your setup? Do you have a back flow preventer ? ( if that the correct term!? Anyone anyone?)
|
No back flow preventer. I'm on a hot head.
|
Are you using a small #1 canister or bulk propane?
|
Bulk, which is outside, and the hose goes through the window.
|
I am sorry, I don't know that set up. Hopefully someone with experience can pipe up. But that is not normal and should not be happening. I highly highly recommend Not torching with your set up.
|
And I want to add good luck in figuring it out.
|
The lady at Hot Head Source said that was a batch of bad torches. She's sending me a new one for free. But now I'm wondering if I should just go to propane/oxy. I really didn't want to, but with the slowness of the hot head and now this... *sigh*
And the problem wasn't the torch itself, but the hose melted. So, yeah, the torch got too hot all the way down. Not supposed to happen, according to the lady at Hot Head Source. |
Thank goodness you had a fire extinguisher handy. And had the presence of mind to grab & use it quickly, and had DH handy to shut off the propane!
|
oh my goodness, so glad your okay.
As for switching torches, I was on my HH for 7 years, and never really wanted to switch. In may I bought a cricket, and it was SUCH a good trade. My beads are so much better (i think) than they were. colors brighter, clear is CLEAR and now I can do Boro!! |
Quote:
IT could have been a failure at torch connection, it leaked and produced a flame and burnt hose off... I could have been a defective hose and blown hose off torch connector and caught fire... Would have to actually see pictures of hose and torch to tell what happened.... Maybe its time to graduate to oxy/fuel torch.... Dale |
Quote:
If she gets a new torch, a new hose, and another tank set-up, I would think that she would be okay then?? |
My husband explained that it was an unfortunate combination of overly-hot torch and a crappy Chinese hose fitting with mostly non-existent teethy things. The heat from the torch softened the hose and it slipped off it's fitting.
http://lampworketc.com/forums/pictur...pictureid=4155 Sarah at Hot Head Source is sending me a new torch that won't get overly-hot, and we need to find a better hose. Any suggestions on the hose? |
And when ever you fit a hose over a fitting, please do use a clamp to secure it!!!
|
Where did you get the hose?
|
I'm so glad you didn't get hurt!
|
Quote:
Dale |
Quote:
Try to find hose made in US of A and from reputable manufacturer and check markings on hose to see that it really is LPG gas certified to 350 psi... Fault in hot from HH and new torch is not going to make any difference.... Fault lies in poor CHINES PRODUCT and retailer who is not aware of the crap product they are selling..... Does not matter if its on a hose on a HH or back yard BBQ, or a weed burner or turkey frier, IT SHOULD NOT HAVE HAPPENED.... There ere so many hose manufacturers out there its hard to recommend and specific one.... Dale |
Quote:
Unfortunately the cheap import is not manufactured to quality standards we should be expecting.... But yes bottom line is all hoses should have a clamping device of some sort on them.... Dale |
Quote:
Dale |
Thanks for clarifying that Dale, and I am just so glad that Lyssa you were able to react so fast and get it under control. Fast thinking is not easy in a situation like that!
|
With a bulk tank and no Flashback protection this could have been a disaster! If I have to use this type of fitting I always prefer to clamp it myself. Good to hear that no one was hurt.
|
When using a Hothead on a bulk tank, you are putting full pressure from your tank on the hose (which is not good). If you are going to continue to use this type of setup you should at least use a regulator directly attached to the tank so that the hose does not have 100's of lbs of pressure on it. Also, don't use cheap Chinese crap . I'm glad you did not blow yourself up, that would have been horrible.
|
Wow, how scary. Glad you are ok.
|
Mike H
HH torches are designed to work on tank pressure. There was some discussion re HH and regulators on here a week or so ago. The conclusion was that a minimum of 60 PSI was needed to run a HH reliably but that a few people had managed to get/keep one running as low as 45psi. These were exceptions to the rule. I attribute that to variations in torch manufactureing tolerances. As Dale says, cheapass chinese products have proven again and again to be inferior and dangerous at best and deadly in some cases. Also note that the incident happened with a bad torch that is being replaced. It should not happen again with the new torch and if a new proper hose with clamp is used. |
I could be wrong but I believe the hose was purchased at Walmart in the camping department (about 4 years ago, but maybe had 20 hours of use on it). Yeah, yeah, now I know better. I hate Walmart.
Barbs, check. Hose clamp, check. New Hot Head, coming in the mail. BUT: spent the day playing on a friend's Minor at her house. I don't think I'll ever go back to the Hot Head again. Still need the hose clamp, though. :) (I wonder what my guardian angel's name is. He does good work.) |
Glad you are ok! I upgraded to a minor right after taking my class on a hot head. You will love it.
|
My hubby just changed my hoses this past weekend and after clamping took some dish detergent and water and brushed it around the hose ends clamped to show if there was still any leakage..that's always something good to do.
So glad you are ok..how scary! |
Oh my goodness, so scary. I'm glad you are OK.
|
All times are GMT -7. The time now is 8:01pm. |
Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.