Lampwork Etc. - Homeroller

Lampwork Etc. (http://www.lampworketc.com/forums/index.php)

- Tips, Techniques, and Questions (http://www.lampworketc.com/forums/forumdisplay.php?f=29)

- - Homeroller (http://www.lampworketc.com/forums/showthread.php?t=315961)

bigdumbslabz

2020-12-20 9:25am

Homeroller

Has anyone ever seen homemade rollers out of skateboard trucks

Sent from my iPhone using Tapatalk

ESC	2020-12-20 10:54am

Probably okay for smallish work, but remember, the bigger the work, the more heat generated. After applying glass to a gather of about 1 1/2", I can't work without a sleeve. What temp does poly, or for that matter, aluminum begin to soften?

bigdumbslabz

2020-12-20 3:56pm

Would you have a better idea by any chance

Sent from my iPhone using Tapatalk

ESC	2020-12-21 5:14pm

You might be able to find steel swivel casters for rolling chairs. One of mine just has large steel washers set at a ninety degree angle from each other. It works just fine.

All times are GMT -7. The time now is 4:39pm.