extra part (s) to attach oxy-con to Nortel minor
Hello
I ordered a 5 Lt Devibliss oxy-con to attach to my burner (Nortel minor burner), and I have a question about any extra part or parts to join my oxy-con to the burner and any supplier for these parts. Photos will be very appreciated. Thank you |
Looks like a barb end, so assuming you already have an oxy hose, you'll just need a small hose clamp. If your hose still has the end fitting, just cut it off. And just a tip- a little bit of spit on the barb will aid greatly in getting the hose on the barb. But don't forget to slide the clamp on the hose first!!
https://www.google.com/search?q=smal...w=1600&bih=758 |
Thank you
|
Mine screws on. I think we removed the barb and there was a fitting under it that we screwed the line right on.
|
thank you ...that sounds easy
|
If I remember correctly the removing was just a little tricky to keep the fitting still while we unscrewed the barb part.
|
1 Attachment(s)
This is mine. Not sure if all models are the same or not.
|
I can see that you got rid of the oxy-con thin tubing to replace it with the one in the picture.
|
My apologies, I read the original question wrong. My answer was for the barb of the burner, not the oxycon.
|
It is OK, your information is still useful since I have no idea about the way to put everything together.
|
All times are GMT -7. The time now is 9:48pm. |
Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.