Need some technical advice.
hi, i am furnace working some spheres, and i want to connect the with hollow tubing, in school we use loctite UV reacting glue. This will be a coldworking process, involving no heat at all, so I don't need to worry about COE differences. anything you can think of in terms of technical things i should be aware of?
|
As long as you dont ever intend on heating it back theres really not much to speak of. Most epoxies work well also.
|
using a uv light is better than the sun. i got some cheap led uv bulbs on ebay and put them in a shop light. im not sure if these are the exact ones, but here is a link.
http://cgi.ebay.com/2-x-110V-AC-Scre...QQcmdZViewItem i also bought a xmas tree foot pedal, so as im holding stuff together i dont have to move my hands to shut the light off, you can make sure everything is in the right place, then turn it on. ro |
All times are GMT -7. The time now is 4:42am. |
Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.