Newbie:Kiln Paragon Fusion6
 

Newbie wondering if I should pull the trigger on this...I found a paragon fusion6 kiln with bead door... I see a lot of
Posts about paragon bluebirds and PCM... But nothing about any of the fusions. Does anyone have any advice on it? I would like to work mostly in soft glass but hubby want to be able to work soft glass and boro... Also since I'm waiting to hear back from the seller what questions should I ask? Thanks In advance to all.


Kindly,
Pam and Jerame
Glassy guy n doll

The bead door is 2 1/2" x 6 1/2". The kiln's maximum temperature is 1700F. The Fusion-6 fires on a 120 volt, 20 amp circuit. I would ask to see pictures of the firing chamber including the lid. What is the condition of the firebricks?

More information on this model:

http://www.paragonweb.com/FUSION6.cfm

Sincerely,

Arnold Howard
Paragon Industries, L.P., Mesquite, Texas USA
ahoward@paragonweb.com / www.paragonweb.com