Lampwork Etc. - Have a lynx, and I have an upgrade question.

Lampwork Etc. (http://www.lampworketc.com/forums/index.php)

- Tips, Techniques, and Questions (http://www.lampworketc.com/forums/forumdisplay.php?f=29)

- - Have a lynx, and I have an upgrade question. (http://www.lampworketc.com/forums/showthread.php?t=316957)

lunesse

2021-05-24 4:07pm

Thin stringer work

I use bullseye, but I sure suck at it. How folks draw with it so thin is just beyond me. Maybe it's my Lynx, I know they run hot. Any Lynx users have any thin stringer work tips? I guess I could be way out farther in the flame, it just feels very weird out there... hehehehe.

LarryC

2021-05-31 11:47am

are you using the blue oxy?

pko_growz

2021-08-11 11:23pm

I barely crack the green oxygen knob and use the blue and red to get a small pin point flame

LarryC

2021-08-13 8:34am

Quote:

Originally Posted by pko_growz (Post 5111320)

I barely crack the green oxygen knob and use the blue and red to get a small pin point flame

The green oxy is the primary and should be used as such. These torches are so versatile that you just have to experiment to find what works.

pko_growz

2021-08-13 8:37am

Quote:

Originally Posted by LarryC (Post 5111374)

The green oxy is the primary and should be used as such. These torches are so versatile that you just have to experiment to find what works.

Actually that's what GTT recommended in their instruction video

Sent from my moto g stylus using Tapatalk

All times are GMT -7. The time now is 1:45pm.