Lampwork Etc.

Lampwork Etc. (http://www.lampworketc.com/forums/index.php)
-   Tips, Techniques, and Questions (http://www.lampworketc.com/forums/forumdisplay.php?f=29)
-   -   bullseye annealing schedule (http://www.lampworketc.com/forums/showthread.php?t=26192)

meadowesky 2006-06-29 7:30pm

bullseye annealing schedule
 
could someone please help me out? I am assuming it is not the same as moretti? Thanks!

squid 2006-06-29 7:34pm

I believe www. bullseyeglass.com has suggested annealing schedules on it. Look under tech tips.

Sigrid

Laurie L 2006-07-01 5:08pm

Brandie I use the same schedual as my effetre glass. I have heard some say to use a slightly different and some say the exact same. Not sure which is the best, but I know bullseye does like the kiln to be slightly hotter. If I am doing both I just leave my kiln on for an extra 1-2 hours at the 960 temp. I have a fire brick kiln and its been successful so far.

Chuckie 2006-07-01 5:58pm

Brandie,

Go to www.bullseyeconnection.com. Click on the Education link at the top of the page, then check out Technotes 4. The annealing info is on page 6 thru 8. There's some other great info, too.

Char

playswithfire104 2006-07-01 6:49pm

I anneal mine the exact same as moretti. I have even made both types of beads in the same sitting and annealed them all together. I haven't had any problems at all.


All times are GMT -7. The time now is 3:29am.

Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.