CIM Azure boiling/pitting?
Used my CIM Azure for the first time this weekend and it was getting that horrible boiling/pitting that Turquoise often gets. Anyone else get that? On the CIM website it does address that problem and says that it's caused by a "hose issue" but I was wondering if anyone else has seen the problem and come up with a solution. I'm not ready to take my entire rig apart quite yet to solve the problems I'm having with one color of glass.
I did notice that if I pulled the glass way out in the flame the boiling/pitting did NOT stop, but if I put it REALLY close to the torch, it did. WTF? Also, once I got the boiling/pitting to stop, the bead ended up nice and smooth. Once the bead was cool it did NOT have any pits left in it like Turquoise does when you pull it out of the kiln. I was using the Azure to encase Coconut rather thinly, so I can't really tell if the transparent Azure is left foggy/scummy from the pitting that occurred in the flame. |
You just answered your own question, lol. Work it higher in the flame. I would guess you are working too hot. You can get away with it for a lot of glasses but some just want you to treat them right :)
|
Quote:
I'm trying to see if anyone else has worked with Azure enough to have come up with a more logical answer. :) |
I have experienced pitting with this glass too. I find, though, that in general, once glass begins to boil and pit, it's hard to stop it, and working further out can still be problematic unless you let it cool a lot and baby it.
No idea why it stopped pitting close to the torch, unless it really is a flame chemistry thing, as CiM hinted at. |
I believe the closer you are to the torch head the more reducing the flame is. Try working in an oxy rich flame and see if that helps.
|
Quote:
|
Oh, I read that the other way, sorry. What do you have for a torch?
|
Quote:
|
I haven't found a solution for the pitting-tried oxidizing, reducing, far out -first CIM glass that I absolutely hate and it is such a pretty color. Guess I'll try working closer to the flame and see what happens.
Georgia |
That explains a lot :)
|
Alli sent me a rod to try because it was giving her problems on her HH, and so far so good. but I don't know why.
|
Quote:
|
minor with 5lpm oxycon
|
*nods* I LOVE Azure, but it hates the HH, because it just doesn't like a reducing flame. It was even worse if I marvered it. Fortunately it likes Eileen and her torch LOL
I second the more oxy suggestion. Alli |
After my saying I had no issues, I used it today over silver leaf & tiny little bubbles kept coming up. I don't know if it was because I was working it long, over silver, or just different from last time. I put it in the kiln, will check it out before getting it off the mandrel and possibly put it back in the kiln to reheat & see if I can do something to fix it next torch session if needed.
|
All times are GMT -7. The time now is 12:56pm. |
Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.