Yesterday I picked up the Fireworks bead making kit to finally get started making some beads. I will be using a 1lb MAPP gas canister. I plan on using this kit until the torch dies, then getting a HotHead and keeping the same setup. I can’t upgrade past a HotHead with a 1lb canister because I currently rent a condo.
I was wondering what kind of ventilation is necessary to have for a beginner kit like this? Also, just in general, some ideas for a safe beginner setup with this kit?
I will be making my workspace in a spare room. There is one sliding glass door in the room. For my tabletop, I will be building a cubicle type of design out of sheet metal to surround my torching area. For ventilation, the idea for now is to cut a board of some material to the height of the door, and run a flexible duct out for ventilation. Is that sufficient for this starter kit?
Here is my reference of someones ventilation setup that I want to try:
https://imgur.com/a/UEqH9Lj
And the cubicle design I am referencing:
https://imgur.com/a/e3yu0km
I know the more ventilation and safety the better - no matter the equipment. However this kit doesn’t make much mention of that since it's for beginners so I thought I would ask on here!
Here is the kit:
https://www.amazon.com/Fireworks-FW6.../dp/B000C11SD0
Thanks for any help or guidance