Quote:
Originally Posted by Shrimp
Here is a photo of the adjusting knob that I could find inside the machine. It isn't easy to see straight on. I can look at it from the side. There is an arrow on the front of the dial, but no exact numbers to adjust the knob to. Any advise on how much to turn the knob?
Shawnette, I have been giving some thought lately to putting together one of those holding tanks that Trey was so kind to share his instructions to. |
Thats the pressure regulator. You may have to pull out on the knob, that style locks so it can't be turned. Just turn it clockwise 1/2 turn at a time. Remember, raising to pressure will also raise the flow. You should adjust the flow back down to 5 lpm. If you run it over 5 lpm, you could loose purity.