Quote:
My hubby works in Hydraulics...we might get to tinkering...
|
In that case he prob has forgotten more then I know about it all.
Quote:
How, and at what point in the system, do you measure the pressure output of the oxycon (which is used as a set point for the tank regulator)?
|
In a test situation or a repair place they useally take the pressure reading from a tap thats inside the unit right thats right by the internal regulater.
But it can also have a pressure gauge hooked up to the outlet on the out side that your hose hooks up to get a pressure reading. wich might be more closer to the actuall working pressures its putting out at the nozel.