Just to make sure it's clear, if you use a hook up like the one in Dale's drawing, you don't need y-connectors. The tee connector serves the same purpose of dividing your oxy and propane and sending part of the volume through the solenoid while the other portion bypasses it.
Also, you can get a foot switch at Harbor Freight for under $15 that is pre-wired. You can use an extension cord for your wires, if you want to make it easy. Cut off the female end discard it, cut off two short lengths for wiring the solenoids and then use the remaining long piece with the female plug to wire to the solenoids and plug into the HF foot switch.
__________________
Etsy:
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Foot Pedal Tutorial:
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Kevlar Fingerless Gloves:
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|