[laserglass]

ever get a bead stuck on real good. here is a cheap and easy tool to get it off. go to your local Lowe's or Home Depot, and get a riveting tool. they come with inserts for several size wires including most of the standard mandrel sizes. soak and clean off most of the bead release, then insert the mandrel into the proper size hole. snug the bead up close to the tip. then apply gentle pressure and the bead will come free. if you like a small O ring can go in between the tool and the bead to minimize chipping. then soak in an ultrasonic cleaner to clean out the rest of the bead release. finish with a small brush and you are done.