View Single Post
  #9  
Old 2018-09-02, 6:48pm
Destonomos Destonomos is offline
Junior Member
 
Join Date: Sep 01, 2018
Posts: 26
Default

I went down the hvac road before i settled on the blower from harbor freight. I called around 3 or 4 hvac places and asked about older blowers and it seems all the places just wanted to point me in the direction of buying new or trying to buy an entire system.

One company showed me this item:

https://www.energyconscious.com/good...SABEgLuT_D_BwE

That is around the average cost I found. Again, more expensive then the harbor freight option.

I also saw a ton of "dual inlet" blowers on ebay and craigslist for super cheap (like 70 dollars) but I am not sure how I could use those in this design to work.

Am I maybe approaching the hvac guys with the wrong lingo? I talked about using the blower as an exhaust and the guys sounded like they just scratched their heads over the phone and were confused.

The windows also, do not open. They honestly need to be replaced. The one I'm planning on exhausting in now has nails in it to keep it from opening. Tomorrow is going to be interesting

Last edited by Destonomos; 2018-09-02 at 6:52pm.
Reply With Quote