Quote:
Originally Posted by Dale M.
Welding fume catching system are just smoke removal system, they do not effectively gather or removing the carbon monoxide and NOX fumes and heavy metal molecules released for hot glass, generated by large flame consuming oxygen and fuel.... Simply they (most welding fume hoods) do not move enough air and try to capture smoke particles with a filter.... What we are trying to get rid of are microscopic particles small enough to go through a smoke filter...
Subject is covered almost to ad nauseam here...
http://www.artglassanswers.com/forum...5c5ff3188a042e
http://www.artglassanswers.com/forum...5c5ff3188a042e
Dale
|
We have argued this in the past and I seem to recall Dale that you admitted to having zero personal experience with funnel systems. For the record, Mine worked very well and moved a huge amount of air. The downside as I stated is that you must work directly in front of or directly below the funnel for them to be effective but thats no surprise. By the way, mine was not a filtration system but was designed to exhaust through ducting. Again, for your application I think you need an overhead hood.