You will need a "Y" connector for fuel hose as your "fires" can use same propane source... These come with or without valves .. With valves might be preferred as it will allow more control and not rely just on torch valves for "control" when outer fire is not in use...
You will need "barbed" fittings and clamps for end of hose that is without brass fittings...
These fittings come in two types one for oxygen one for fuel (left hand thread)
And you will need "second" oxygen hose to feed the "other" fire that is not on concentrator (or tank) ....
As stated above any decent local welding supplier should have the parts and can custom assemble what you need to get you from tank regulators (or oxycon ) to torch....
Dale
__________________
You can lead a person to knowledge, but you can't make them think.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Vendor-Artist-Studio-Teacher Registry
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
San Francisco - A Few Toys Short of a Happy Meal