Quote:
Originally Posted by Hubcap
I have used that technique and find it works pretty good. I only use it when I know I'm going to be heavily decorating the bead because that cut end always leaves a bit of a mark (on most transparent and some opaque colors) as it melts into the base bead - for me anyway.
|
If you're using a tweezer or other kind of grabbing tool to hold the short length of glass as you wrap it on, you can lay down half the length of glass starting with one cut end and then turn the short around and start again on the same bead with the other cut end. If you're doing it bare-fingered, not so much.
