Quote:
Originally Posted by yonil
Hi Dan, I don't know if you're on Facebook, but the group Torchtalk (no spaces) might be a better place to ask your questions. They work with a lot of tubing, and I have definitely seen other people ask about making torches on there, before. You haven't mentioned your ventilation set-up, though if you're making glass and casting, you probably have an extraction system?
|
Thanks for the suggestion I will check it out!
I have a 12"inline exhaust fan about 3 feet above the table I plan to work on in a 10X20' building and one 10' side has a roll up door that can be opened. The 12" fan just exhausts directly outside Not sure if this is sufficient? I also wear a full face respirator when working will my kiln as most the glass I've made is 27%-40% lead oxide.
I haven't put much more thought into it until you mentioned fume extraction but do the fumes need to filtered? or is expelling the fumes outside considered ok?
-Dan