Quote:
Originally Posted by mstscc
First off, this is my 1st post, so if this is in the wrong place please feel free to move it.
I have never done lampwork before, and as soon as I get this torch attached, I'll be making my very first bead. So I have my space, my ventilation and fire proof area set up, and I'm trying to attach my MAPP gas canister and torch to my table w/ a C- clamp and L- braket. Only problem is that it sits at a 90 degree angle- staight up and down. The attachment pieces were sold to me by the nice lady at the glass shop, so I assume she sold me the right stuff. (I'd call her, but her shop is closed fore the week and I'm DYING to finally get started.) I need it to be at about 45 degrees, right? If you need pics let me know. Any help you can give me on this would be greatly appreciated.
Thanks!
Shannon
|
Shannon,
My husband did not want me to c clamp to his work bench. I have the cannister attached by a round metal clamp you tighten with a screw driver and a small metal bar with holes in it bent into an L .Make the L and turn it so the bottom of the L can be placed flush against a small piece of wood. Screw it into the wood and I have the piece of wood sitting in a vice. You can doe this with a c clame and not screw it into the wood. I hope this is not to confusing. If it is email me and I will give you my phone numbe and try to explain it better. the pieces parts can be bought at home depot.
Ann