Thread: 1st Kiln
View Single Post
  #5  
Old 2020-10-29, 10:47am
KJohn's Avatar
KJohn KJohn is offline
Slogan Challenged...
 
Join Date: Mar 21, 2009
Location: Maricopa, Arizona
Posts: 6,273
Default

Hi Armo. No, it must be put in hot to a hot kiln with a holding temp typically 925-960F. (Depends on type of glass, the websites for the manufacturer should have the instructions). Ramp down per instructions for that glass, some come with preprogrammed schedules if you have a new one with a controller. Otherwise, do manual. There should be some other threads on there for each type of glass. BE for example, waaaay different than 104 Effetre. HTH
__________________
Kristin ~

Facebook:
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

Etsy:
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote