View Single Post
  #1  
Old 2009-06-13, 8:42am
oldschooltofu oldschooltofu is offline
Lampworker
 
Join Date: Jul 06, 2007
Location: Oregon
Posts: 211
Default problem with EXO2 filling station

so i got my filling station in today, my tank is empty and i hooked everything up to fill it all weekend so i have a full tank on monday morning.

well first off....there is no instruction manual.
second off they sent me a jenky plastic hose to connect the concentrator to the filling station that leaked when i soap tested it. so now im starting to get pissed that i spend a lot of money on a piece of equipment and they send me shotty hose and fittings.

so luckly i found a green hose with proper b fittings and hook it up. let everything run for a little while and the yellow light comes on saying O2 too low.

so i soap test all my fittings again and check that everything is running properly. I even try hooking up my huricane and still no luck. then i hooked the concentrator (that came with the filling station) to my torch, and could not get a good flame, kept blowing out the flame. like it as mostly air and not enough oxygen.

so it keeps saying O2 below normal.

does anyone know the problem here?
did i get a bad one?
My 281 K tank is empty, can the filling station fill a tank from empty?

im quite pissed i cant fill my tank this weekend.
Reply With Quote