If your bead release has tiny little lumps in it, that can cause a little roughness in and around the holes. Which can chip, of course. Mix it up thoroughly to get out all of the lumps. If your bead release has tiny bubbles which will either dry as a tiny bump or pop, those can make a rough surface also. After shaking it up, and before opening the lid, tap the bottle on the sides or hit the bottom several times on the surface of the table so the bubbles rise to the top. After you open it, you can tap a little more until you don't see any more bubbles rising and popping on the surface.
__________________
You live in a world of money. Money means choices. No money, no choices. Welcome to reality.
Melody (Marlee Matlin) from Switched at Birth
|