Ok so just got my Bravo torch and want to build a footpedal with electric type solenoids. I found a couple videos on youtube but they dont really show exactly how to connect the hoses, I realize obviously that the "in" side of solenoid should be the side from the oxy/propane tank...I assume anyhow. Then from there I'm lost, I think you come off the "out" side of first valve with hose, green for oxy / then off the second valve ,red for propane, it's when I get to the torch with four hoses I'm not sure how they connect there. Maybe I'll figure it out when its in front of me but any help now is appreciated.
I posted the links to both videos at the bottom of this thread. Also is it better to buy a " rock it" foot pedal as opposed to building an electric one. I really would like to save a bit of $$ by building my own as opposed to dropping another 480 bucks for the premade one. Any help is appreciated. I've never connected a footpedal so I'm footpedal illiterate
(I do have a master electrician to wire stuff for me so I won't electrocute anyone....namely myself lol). Thanx for the help.
http://www.youtube.com/watch?v=E2jCtS5hJLc
http://www.youtube.com/watch?v=9rH8ZFH5AN0