View Single Post
  #1  
Old 2018-03-07, 5:29pm
jlborek jlborek is offline
Jenn @ Kanna Glass Studio
 
Join Date: May 11, 2017
Location: St. Augustine, FL
Posts: 8
Default Installing gas line to shed studio

Hi! I'm finally getting a permanent studio (I finally stopped moving around). It's been wired, insulated, drywalled, and the tile was installed today. I'm getting giddy!

I'm planning to install a propane gas line to the studio. What PSI do I need for the propane? Am I fine with 5 PSI? I read in one of the other threads that Propane = 5 PSI and Oxygen = 10 PSI. If I need to go to 10 PSI then I need a permit.

If you have any tips or safety suggestions, feel free to respond with tips. I've been scouring the forums for any information I can find and have bookmarked a number of the posts I've found useful. I found Mike Aurelius detailed post on Ventilation and am working with a local HVAC company to see if they can help me out.

Thank you in advance to anyone who answers!

Last edited by jlborek; 2018-03-07 at 5:34pm. Reason: Uploading studio pictures
Reply With Quote