Quote:
Originally Posted by ShepherdCreations
It might be me flamefilly is talking about, I posted about that in another thread.  I have my tank and Devilbiss hooked up to my National 8M when hubby uses it, since I run the Hurricane with my Barracuda and don't use tanked oxy or the 8m much anymore. We turn the concentrator on full flow, then make sure the psi is no higher on the tank than the concentrator is. They both connect to a 'y' into the torch, and it sure uses the tanked oxy a lot slower than just the tank alone. It's cheaper to run it that way, since a Devilbiss doesn't use as much electricity as my generator to run and it prolongs the time between getting our tanks filled. My hubby set it up and maintains my studio so I know it's safe, since he's a chemical engineer and very handy. Good luck! |
Yes - You are the one! I searched for your post but couldn't find it and since I have a National 8m I took note of it but at the time didn't think I would go that route. Thanks
And Thanks Smutboy for the detailed explaination. Clarifies things to the point I doubt I'll do it...although I might experiment out of curiosity to see if there is a difference in flame quality...
My hubby works in Hydraulics...we might get to tinkering...