I have a kiln rack that is narrower than the interior of my kiln and leaves a gap on 1 side between the rack and the wall. I put my beads into the kiln on the rack, not touching any other beads. As I fill the rack I move the beads to the gap and place them on the floor of the kiln and stack them (as long as the beads have been in the kiln for at least 10 minutes). I have never (knock wood) had beads stick together or dent each other.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|