Thread: Oxy/fuel torch
View Single Post
  #3  
Old 2019-07-25, 8:05pm
Speedslug's Avatar
Speedslug Speedslug is offline
Phill
 
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
Default

As long as you are not "ragging" on the torch making 3 inch marbles or paperweights 36 inches from the back wall should do it.

Add in an up angle on the torch and you effectively have more than 48 inches.

It never hurts to put a sheet of cement board ( for mounting tile to in the bath) at the very back. It doesn't have to screwed in place, just leaning it against the wall is a lot of 'just in case protection'.
__________________
The Zombie Apocalypse is Upon Us.
Reply With Quote