The hoses are fine, it can help to have a squirt bottle of dish soap and water to check connections.
The treads are different and you may need a different mount for your torch.
Any excapeing gas or pin hole in the line will bubble letting you know that something needs to be tightened or replaced. The local gas company and welding professionals use the same process to check fittings.
If your getting bubbles simply turn the gas off at the canister and vent the hose before trubble shooting the leak.
Often the fittings just need another 1/4 turn, though some times the O rings need to be replaced.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|