Quote:
Originally Posted by RaymondMillbrae
Glasser,
In regards to the "splash shield" around your grinders: make sure to coat the painted wood on the bottom of the glass with a couple of coats of polyurethane/urethane, and then use silicone sealant to seal the wood to the glass. This will prevent the water from dripping down into the "glass groove" of the wood and cause dry rotting.
Gotta say one more time...n-i-c-e.
Tell your "Better Half" to pat himself on the back!!!
In Christ: Raymond
|
Thank you for the kind words, and the tip about the splash gard, I will do that for sure.