View Single Post
  #11  
Old 2006-07-13, 9:53pm
Feldt's Glass's Avatar
Feldt's Glass Feldt's Glass is offline
Formerly known as LT
 
Join Date: Feb 25, 2006
Location: Pacific Northwest
Posts: 1,624
Default

Thanks for responding Kbinkster. I do however have a question on your comment. I was running at or above the psi you mentioned when this happened to the torch and the candles were always at a normal length but I could not get a good neutral flame due to the lack of oxy concentration. It was more like a reduction flame or somewhere in between. The torch was not used much this way, just enough to trouble shoot these issues.
I would like to know what lpm do you really need to get this torch to run well on a concentrator. Fred from OSGI has said the concentrator I have is the best but it just doesn't cut it for boro. (OSGI 15) It is doing well now with soft glass. I have been going back and forth between the concentrator and a tank depending on what I am doing. It would be great to know how much more oxy I need so I can just run two concentrators and not have cables to change every time I torch. Thanks for your response
Reply With Quote