Regulator
Yes any that will work with your compressor. Some compressors already have one built in. About 10 psi should work well. And a normal bbq regulator for the propane. That yealds about 5 psi on the gas.
Just get nipple fittings for both to add your fuel lines to. I always used clear Tygon tubing for the lines with small hose clamps. Warm the end of the tube up and slide it onto the nipple then clamp it
The torch itself has a built in Venturi Mixer so the two gasses are mixed through it. Turn on the gas slightly first then light it, then add the compressed air slowly.
The 3A torch has nipple fittings on the fuel lines. The 3B torch has screw on fittings for the fuel lines.
|