So thanks again for the responses. I have the 2 oxycons hooked up and of course the set up isn't working!
The one on the left was the one I have been working with no problem. When I run the 2 hooked up together the new one on the right is cycle and running air, but the one on the left is not pushing any air. I can hear it running, but the ball does not go up. I shut off the one on the right and just ran the one on the left and still no luck. Hmmm...
So I though I would post a picture of how I set it up and see if anyone would be kind enough to help me out again.
Alana