Thanks for the suggestions Teri, I'm not sure that would be the problem with this, I have always turned the propane off at the tank and let the gas in the hose burn out then turned the gas nob on the torch off. and I just replaced the hose about 3 months ago. Some how my gut tells me it's the regulator, Don't know why but it's a feeling I have. I've also thought perhaps when I hooked up the oxy con 10 I bought some knew clear plastic lines and like always I over bought. I would guess that I have about 5 feet of clear hose from the machine to the torch, Maybe I'll just go ahead and shorten that some and see if it will help.
Liz R
|