KB and Alaska, thanks for the advice.
I tightened the compressor output filter, its hose clamp, and the hose clamps at the output of the solenoid valve and the sieve intakes.
I am letting it run for 20 minutes. If the yellow light turns on, I will take the solenoid valves out of their mounts and tighten their inputs.
I hope this works.
__________________
Melting boro with a National 3A and and two Devilbiss 5lpm 10psi concentrators.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|