What’s up with the fluxuations?
I have 4 smaller capacity oxygen concentrators and I only get fluxuation problems on 1 of the units at 5 LPM. My guess is because this was a used unit off ebay and it has a problem with releasing nitrogen when switching from one sleeve bed to the other. The oxygen purity at 5LPM is between the high 80's to low 90's and my other 3 units that don't have fluxuation problems are always at 94-95% purity at 5 LPM.
That’s kind of strange. I don't thing you should be getting fluxuation problems with any concentrator modified or not regardless of what LPM you’re running at.
|