View Single Post
Old 2021-09-22, 8:54pm
Speedslug's Avatar
Speedslug Speedslug is online now
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,454

Actually, I installed 2 x 4 between the frame of my chair and the bottom of the seat.
I had to hunt up longer screws from the hardware store.

I also keep handy a half dozen fabric faced foam "yoga" blocks that I can stack, rotate or stand on end for elbow rests while I'm torching.

I cut a hole in the bench top to run my hoses through because I didn't like it so close to the front edge that I didn't have any place to put my elbows.
It was my way around having to make 'wings' like on a 'creation station'.

ETA: Once I got high enough to be comfortable with the bench surface I found that my feet dangled so I have a 6 by 6 about 4 feet long to put my feet on.
This is Nucking Futz!.

Last edited by Speedslug; 2021-09-22 at 8:57pm.
Reply With Quote