View Single Post
  #18  
Old 2018-09-06, 4:07pm
Destonomos Destonomos is offline
Junior Member
 
Join Date: Sep 01, 2018
Posts: 26
Default

Update time:

The last few days have been a roller coaster as I had a flat tire among other things, so I did not get much done.

Today I bought 2 sheets of hardie board and screws to attach it to the wall. In addition to the screws I also went ahead and bought a tube of guerrilla glue construction adhesive to hold the board to the wall as I drill and anchor them in place (1 stacked on top of the other horizontally).



laying on the side:



and other materials:



Total Cost: $57.92

Running Total: $1539.16 (not including the 2 classes).


Floor to Ceiling is 7'10". The table stands 34" tall, and I plan on extending it up 5" with feet extensions. So 39" from the floor. The hood is 1' tall and the motor on top of that will add another foot to its overall size. That is a total of 5.25'.

I also want a 2' gap between the table and hood.

Adding all this up I think I have a few inches to spare in terms of space.

The boards are 3'x5'. Stacking them will put them at 6' tall and with the ceiling being 7'10" that means it will hang to around 5'10".

This will work out as the hood will drop a mere 2 to 3 inches below the absolute top of the backer board.

THANKS FOR READING

Last edited by Destonomos; 2018-09-06 at 4:13pm.
Reply With Quote