Quote:
|
Originally Posted by kbinkster
Side note:
It’s weird about the decal, since I thought those flow meters were put in at the (original) factory. If a machine that once put out 5 lpm could now put out 10 lpm, once it hit 5 lpm, the flow meter would still go up to the original 5 lpm mark on the machine. But with a decal, 5 lpm would show up as 10 lpm. That would mean if you are reading 8 lpm on the decal, the flow meter itself is actually reading that the machine is putting out 4 lpm. That is strange. Maybe someone can explain to me how that works.
|
They replace the light plastic ball with a heavier metal ball of the correct weight for the new reading. If you increase the weight of the ball, you change the amount of flow it takes to float the ball. I had the same question and asked. 
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
"Truth is, everybody is going to hurt you; you just gotta find the ones worth suffering for." -Bob Marley
|