Question ?

[Abacus Beads]

I use to have two concentrators hooked up to my torch with the "Y" connector. One concentrator is in for repairs. My question is this can I use the "y" connector on one concentrator? Will the oxygen escape out the part of the hose that isn't connected to anything?
Liz R

[losthelm]

Are you using quick connects or barbed fittings?

[shawnette]

You don't need a Y if you only have one connector. Just run a single line of hose to your torch. If you don't have a single line, crimp the side that isn't connected so that no oxy escapes. (You know, like when you fold a water hose to cut off the water flow. Secure ir with a zip or twisty tie.)

[Abacus Beads]

Thanks Shawnette I sort of thought that is what I had to do
Liz R