Lampwork Etc.
 
Mountain Glass Arts

LE Live Chat

Enter Live Chat

No users in chat


The Flow

Caber Light


 
  #1  
Old 2022-08-27, 8:26am
OldCrow OldCrow is offline
Junior Member
 
Join Date: Aug 17, 2022
Location: US
Posts: 8
Default lynx Concentrator Question

Looking at the GTT Lynx and am looking for advice on a good concentrator for this torch.
Reply With Quote
  #2  
Old 2022-08-29, 7:12am
rcktscientist rcktscientist is offline
Member
 
Join Date: Jun 19, 2021
Location: los angeles
Posts: 78
Default

My Bobcat requires 15lpm of 6psi concentrators (direct, no HVLP) to run full flame. Those same concentrators could be paired with an HVLP system to run the Lynx and possibly a Phantom in the future.
If you wanna run just a concentrator, you'll need about 10lpm at 15psi for the Lynx. Maybe an Airsep10 or OG20, both run 10lpm up to 20psi. I've got an OG20 I'd part with if you're interested.
__________________
Bobcat on 15lpm and Phantom on HVLP
Reply With Quote
  #3  
Old 2022-08-29, 7:27am
echeveria's Avatar
echeveria echeveria is offline
Senior Member
 
Join Date: Aug 31, 2006
Location: Knoxville, TN
Posts: 2,105
Default

I think it is hard to maximize a Lynx on one concentrator. I use an M20 with one, and while it is decent, it is not all that much above the Bobcat or Alpha on the same concentrator. It just seems like a waste of the capabilities of the torch to me. It could also be that it's a crappy concentrator though. Hard to say.
__________________
Kathy
Reply With Quote
  #4  
Old 2022-08-29, 11:46am
rcktscientist rcktscientist is offline
Member
 
Join Date: Jun 19, 2021
Location: los angeles
Posts: 78
Default

I would recommend buying an oxygen purity meter if you go the route of concentrators. All my concentrators run above 94.7% pure and that has a lot to do with their performance. Just dropping to 92% which is around where most oxycons operate, you lose considerable heat.

Just for reference, my Bobcat can make 2" marbles without too much trouble on 15lpm. I also make cups and pull murrine sometimes. Not quite the same on 10lpm since that last 5 makes a big difference. My Lynx (Phantom center) can do it all as well but needs closer to 25lpm at 6psi so I bought the OG20 and ran 10lpm at 15psi which was slightly hotter. In the end, I went HVLP so I can run my Phantom outer too.
__________________
Bobcat on 15lpm and Phantom on HVLP
Reply With Quote
  #5  
Old 2022-08-31, 12:51pm
OldCrow OldCrow is offline
Junior Member
 
Join Date: Aug 17, 2022
Location: US
Posts: 8
Default

Quote:
Originally Posted by rcktscientist View Post
My Bobcat requires 15lpm of 6psi concentrators (direct, no HVLP) to run full flame. Those same concentrators could be paired with an HVLP system to run the Lynx and possibly a Phantom in the future.
If you wanna run just a concentrator, you'll need about 10lpm at 15psi for the Lynx. Maybe an Airsep10 or OG20, both run 10lpm up to 20psi. I've got an OG20 I'd part with if you're interested.
Thank you. I think I'm going to run off of tanked O2 for awhile but if you want to pm me about the OG20 I'd be interested in knowing more about it.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump




All times are GMT -7. The time now is 2:12am.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Your IP: 18.232.56.9