|
Tips, Techniques, and Questions -- Technical questions or tips |
2014-05-31, 12:31pm
|
Senior Member
|
|
Join Date: Jun 17, 2005
Posts: 349
|
|
Etched bead to shiny again?
Is it possible to make an etched bead shiny again? Would an annealing schedule in the kiln work or do you have to have a higher temperature?
Shauna
__________________
Shauna To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2014-05-31, 5:28pm
|
|
Senior Member
|
|
Join Date: Aug 01, 2005
Posts: 2,159
|
|
You'll need a temp high enough to melt the surface to make it shiny again. You stand a certain risk of bubbles forming on the surface as it melts. It's less of a problem with chemically etched than with sandblasted, but it's still a consideration.
Robert
__________________
Robert Simmons
(Former) Director for Bead Donations
Beads of Courage, Inc.
|
2014-06-01, 1:15am
|
|
Glass-aholic
|
|
Join Date: Mar 21, 2007
Location: CT, tolland CT
Posts: 4,332
|
|
You may be able to shine it up a bit with a polish, oil or wax as well. Mag not look quite ax shiny but it might work for you.
__________________
Minor 10lpm Oxy-Con + HH on Propylene . . . . . .
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. . To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. hand dyed silk ribbons in many colors!
WASHERS & TOPPERS - layering components for interchangeable glass topper and to use in other jewelry/metalwork.:
|
2014-06-01, 5:24am
|
|
Senior Member
|
|
Join Date: Aug 28, 2005
Location: Sanger, Tx
Posts: 3,552
|
|
In some instances I put clear fingernail polish in a big hole bead's hole. I guess if you did that with an entire bead it would eventually wear off where it hits your neck.
-D
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Donna Felkner - To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. - To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. - To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. - To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2014-06-01, 8:17am
|
|
hyperT
|
|
Join Date: Jan 31, 2013
Location: San Antonio, Texas
Posts: 582
|
|
A rock tumbler and cerium oxide will polish it back out. A tumbler will also etch your beads as well.
|
2014-06-03, 6:02pm
|
|
Phill
|
|
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
|
|
Aye. I would go with the tumbler and polishing compounds. It is how they get rocks to that glossy finish.
It takes a while, I would imagine, but for me it would be safer that putting it back in the heat.
I have heard and even tried reheating solid beads but hollows would likely be a crap shoot for me and my skill level.
You could buff it with cerium and other polishing compounds and a Dremel tool or a buffing wheel I suppose.
__________________
The Zombie Apocalypse is Upon Us.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 9:01pm.
|