|
Tips, Techniques, and Questions -- Technical questions or tips |
2011-12-28, 10:41am
|
|
Puddy Cat Lover
|
|
Join Date: Nov 04, 2005
Location: DeMotte, IN
Posts: 1,592
|
|
Using Natural Gas ???
Hello All,
Well after some grueling months of lampwork idleness (due to family issues), I'm finally getting back behind my torch. Yay!!!! I've moved my lampwork cart and supplies into a room that has a natural gas hook-up. My question is, what is the cheapest and safest way to hook up my torch?
If this subject has been discussed in the past, I'll keep searching, but just skimming through a few pages of post, I haven't found it yet. Still looking. If anyone can point me in the right direction with links and advice, I'd greatly appreciated it.
Using a Nortel Minor with a 5psi Oxycon.
Thanks you!
J.
__________________
Jeanette Savina Cobb
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. *
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2011-12-28, 1:06pm
|
|
Member
|
|
Join Date: Sep 17, 2005
Location: West Chester, PA
Posts: 99
|
|
I had a professional plumber "tap in" to our NG line. He installed a shut off valve on the wall and connected the line from the wall to my torch. I had an electrician install a dedicated line for my kiln. I run my torch on 2 concentrators, originally I had just one concentrator, but found that my flame was too cool, two has been great. Hope this helps
Kris
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
mini cc, ng, & 2 concentrators
|
2011-12-28, 2:32pm
|
Junior Member
|
|
Join Date: Sep 24, 2011
Posts: 5
|
|
I just finished my NG set-up (pics in studio forum). Like Kris we had an HVAC guy (in our state those guys handle NG, not the plumbers), tap the line and handle the ventilation. Biggest challenge was getting the various contractors to understand what we were trying to achieve....you say torchwork and it's like you're speaking Greek.
|
2011-12-28, 2:32pm
|
|
Senior Member
|
|
Join Date: May 21, 2006
Location: Cincinnati
Posts: 2,807
|
|
Professional plumber. Cost less than $100. My husband was sure he could do it, but some things are worth having done professionally.
__________________
Lynda
Cheetah, 5 lpm and 7lpm conc/generator (8-9 psi), natural gas (booster), started 11/06
"The time you enjoy wasting is not wasted time." -- Bertrand Russell
|
2011-12-28, 4:35pm
|
Member
|
|
Join Date: May 09, 2011
Location: Decatur, IL
Posts: 60
|
|
Quote:
Originally Posted by LyndaJ
Professional plumber. Cost less than $100. My husband was sure he could do it, but some things are worth having done professionally.
|
Me too, I probably could have done it but felt better going with a pro on this one.
__________________
It is a privilege to bear arms as a soldier in the defense of a free people.
Once a Marine, Always a Marine! Semper Fi!
|
2011-12-28, 7:48pm
|
|
Senior Member
|
|
Join Date: Feb 15, 2006
Location: In my Studio
Posts: 1,811
|
|
Had plumber connect the gas line into spare room. Hubby finish running the line with two cut offs. One at the side of my table within reach and one at the floor. Cost about $100 to do it .
|
2011-12-28, 8:51pm
|
Senior Member
|
|
Join Date: Jul 04, 2010
Location: Missouri
Posts: 417
|
|
My DH, who's a professional, set up my system and advised me that I would get better performance by changing the pressure from gravity to psi. He made a step down to take care of the lower pressure needs for all the rest of the gas things like water heater, oven, etc. I'm able to do boro quite well with it. It also makes a better bill each month because it is calculated differently. All it cost me was making some iridescent colored glass fish to hang from the rear view mirror LOL.
|
2011-12-29, 7:04am
|
|
Puddy Cat Lover
|
|
Join Date: Nov 04, 2005
Location: DeMotte, IN
Posts: 1,592
|
|
Oh soooo helpful!!!! EVeryone thank you!!!
Yesterday (last night), I went au natural'. Hubby was a plumber in another life. (comes in so handy) We went to the hardware store and for around 25 buck-a-roos, not including the hose, which we had plenty of, he got me all hooked up. Love the blue flame. Glass melts just fine. Smooth like butta, pressure is perfect for the glass I work with. (not a boro broad yet). I'm a happy camper!!!
Love yous guys!
J.
__________________
Jeanette Savina Cobb
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. *
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2011-12-29, 1:31pm
|
|
Curmudgeon Engineering
|
|
Join Date: Feb 15, 2006
Location: Near Seattle, WA
Posts: 1,723
|
|
Going 'au natural' must have been what motivated hubby....right
|
2011-12-29, 2:55pm
|
|
Member
|
|
Join Date: Sep 17, 2005
Location: West Chester, PA
Posts: 99
|
|
I know you will be so happy with your new set up. Happy Torching and Happy New Year
Kris
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
mini cc, ng, & 2 concentrators
|
2011-12-29, 8:46pm
|
Alaska Boro
|
|
Join Date: Dec 10, 2009
Location: Anchorage, Alaska
Posts: 1,065
|
|
Natural gas is nice and very convenient. Using a Scorpion with NG and a pair of 5 LPM at 10 PSI machines. The negative part is that for a residential studio the maximum pressure is set at 11 WC. Higher for industrial use in an non residential area. The interesting part is that distribution pressure at regulator is at 60 PSI. But .4 on the other side.
|
2011-12-30, 9:45am
|
|
Bigger, longer, and uncut
|
|
Join Date: Aug 01, 2007
Location: Fort Collins, CO
Posts: 447
|
|
We were able to get our natural gas increased to .5 psi from .25.
A limitation based on the pipe size into our neighborhood limited us to that, so it seems that in a newer development one could get the domestic pressure increased even more.
We hired a plumber to do the work. He pulled a building permit, so the work was inspected and signed off.
__________________
Evelyn
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2011-12-31, 10:34pm
|
Senior Member
|
|
Join Date: Jul 04, 2010
Location: Missouri
Posts: 417
|
|
In time you will probably notice that the natural gas is the cleanest fuel you can use. There are a lot of colors that just purr when they're introduced to it. And the pressure is always consistent, you don't need to worry about how much is left in a tank.
Andrea
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 9:40pm.
|