|
Safety -- Make sure you are safe! |
2013-04-08, 2:56pm
|
|
tiptrinket
|
|
Join Date: Jul 07, 2007
Location: Knoxville
Posts: 263
|
|
Hood Height
Could one of you experienced wonderful lampworkers please tell me what the approximate distance should be from the TOP of my work bench to the BOTTOM of my ventilation hook? My studio is 12 x 20, I am going to hook up a nortel minor and my ventilation hook is 760 CFM or 600 CFM, (I'm not at home to look and it has been a while since I bought it) I don't think this matters anyway.
Thank you for any help anyone can give me.
Tippy
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-04-08, 5:08pm
|
|
Gentleman of Leisure
|
|
Join Date: Jun 10, 2005
Location: A Little Bit West of Yosemite Valley
Posts: 5,200
|
|
It should be as close to your work surface as practical.... Meaning you do not bang you head on it as you work at your torch....
And yes fan/blower size does matter... IF there is not though air flow your ventilation is useless.... It will not perform or remove the very combustion by products that is the health hazard you are trying to avoid....
Dale
__________________
You can lead a person to knowledge, but you can't make them think. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Vendor-Artist-Studio-Teacher Registry To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
San Francisco - A Few Toys Short of a Happy Meal
|
2013-04-08, 6:48pm
|
|
tiptrinket
|
|
Join Date: Jul 07, 2007
Location: Knoxville
Posts: 263
|
|
Thank you for the reply. So I guess about 24" to 30"?
And yes, I didn't exactly mean it doesn't matter. Don't you need a fan based on the size of the building?
Tippy
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-04-08, 7:45pm
|
|
Gentleman of Leisure
|
|
Join Date: Jun 10, 2005
Location: A Little Bit West of Yosemite Valley
Posts: 5,200
|
|
Quote:
Originally Posted by tiptrinket
Thank you for the reply. So I guess about 24" to 30"?
And yes, I didn't exactly mean it doesn't matter. Don't you need a fan based on the size of the building?
Tippy
|
Fan size is bases on "face opening" size of hood.....
http://www.artglassanswers.com/forum...php?f=12&t=273
Dale
__________________
You can lead a person to knowledge, but you can't make them think. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Vendor-Artist-Studio-Teacher Registry To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
San Francisco - A Few Toys Short of a Happy Meal
|
2013-04-09, 3:36am
|
|
Senior Member
|
|
Join Date: Sep 01, 2012
Posts: 198
|
|
Where should the front of the torch be relative to the front of the hood? Does it need to be under it or is a few inches back work as well?
|
2013-04-09, 7:01am
|
|
Gentleman of Leisure
|
|
Join Date: Jun 10, 2005
Location: A Little Bit West of Yosemite Valley
Posts: 5,200
|
|
It can be outside front edge, the forces of the the combustion will push the gasses forward and the natural tendency to to point torch a bit upwards and for hot gasses (plume) to rise the hood will capture most of the combustion by products...
Dale
__________________
You can lead a person to knowledge, but you can't make them think. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Vendor-Artist-Studio-Teacher Registry To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
San Francisco - A Few Toys Short of a Happy Meal
|
2013-04-09, 9:14am
|
|
Somewhat out there!
|
|
Join Date: Aug 26, 2009
Location: Esko Minnesota
Posts: 735
|
|
I just put mine together and I run a Cricket. I think I have settled on 24". I say think because I put together a box to try out before I had one made from sheet metal. My torch sits outside the box and the box is 24" deep but the counter its on is 30" deep. And so I ramble. lol.
__________________
Julianne To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-04-18, 6:56pm
|
|
I fart diamonds
|
|
Join Date: Jun 14, 2005
Location: Altamonte Springs, FL
Posts: 3,893
|
|
Quote:
Originally Posted by Dale M.
It can be outside front edge, the forces of the the combustion will push the gasses forward and the natural tendency to to point torch a bit upwards and for hot gasses (plume) to rise the hood will capture most of the combustion by products...
Dale
|
That's an interesting hood. What is it made from and do you have bigger pics?
__________________
-Shawnette the original "everybody get a grip" girl
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-04-19, 7:20am
|
|
Gentleman of Leisure
|
|
Join Date: Jun 10, 2005
Location: A Little Bit West of Yosemite Valley
Posts: 5,200
|
|
Its made from sheet metal and electrical conduit, and no I don not have any bigger pictures.... There was a gentleman in Texas that was going to manufacture them but one day the was a "poop" fight on WC with him and a few others, and he became so disgusted with the lampwork scene he just walked away....
Dale
__________________
You can lead a person to knowledge, but you can't make them think. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Vendor-Artist-Studio-Teacher Registry To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
San Francisco - A Few Toys Short of a Happy Meal
|
2013-04-19, 7:33am
|
|
I fart diamonds
|
|
Join Date: Jun 14, 2005
Location: Altamonte Springs, FL
Posts: 3,893
|
|
thanks!
__________________
-Shawnette the original "everybody get a grip" girl
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 6:47am.
|