I think I finally figured out what my problem with my O2 generator is. I popped a check valve on the green PM hose on the back, which appears to be feeding to my O2 line. The valve is a connector between 2 pieces of translucent narrow green line near the noise muffler. Each end of the tube has a fitting secured in the tube that has a plastic screw on the end. Then they both screw into this check valve. One of the plastic screws snapped off inside the check valve. So I need one fitting and one check valve. Anyone have an old OG-15 or similar hanging around? The valve says "Air Logic" on it. The generator's over 5 years old so I'm not at all worried about warranty issues...
Contact me here or email me at
beadcat@gmail.com.
Thanks! Not working so well without it... Like melting glass over a candle.....
b2