|
Tips, Techniques, and Questions -- Technical questions or tips |
2018-10-26, 12:10pm
|
Junior Member
|
|
Join Date: Oct 19, 2018
Posts: 9
|
|
If you were to start today!
Hello!
I am a newbie with a newbie question. And I really couldn't find this answered through searches. So, if you were to start doing this today, with all that you have learned, what would be the things you would buy and where would you buy them from? And let's say you are starting from scratch and you are budget conscious.
|
2018-10-26, 3:12pm
|
|
Salt Box Beads
|
|
Join Date: Oct 23, 2005
Location: Heading to Paradise
Posts: 4,161
|
|
http://lampworketc.com/forums/showthread.php?t=122124
https://www.devardiglass.com/starterkits.htm
Lampwork is expensive. But you can have a test run on the cheap with a Devardi kit. All of their supplies are about the least expensive you can get. A lot of people do not like the glass but you can watch videos and learn how because it does take a different technique than most other soda lime glass.
Pay close attention to where you torch that you adequate intake air and you have a fan to pull the fumes from torching away from you and out of the building. The chemicals released while melting glass are the first thing you should research so you know exactly how detrimental to your health this hobby can be.
|
2018-10-26, 3:36pm
|
|
dances with ideas...
|
|
Join Date: Sep 15, 2005
Location: A map dot in Montana
Posts: 2,356
|
|
Hi, and welcome!
Have you had the opportunity to take a class? There also are plenty of YouTube videos. And the best source of a large amount of info is this website.
I would start with a hothead torch. You can do a LOT with one and they are relatively inexpensive. You need a way to attach it to your bench, and I would get a hose in order to use larger gas canister. I’ve heard that some people use propane. Initially you could use drywall to cover the top of the bench. Or something else that isn’t flammable.
You need a decent setup for ventilation. That is not optional! Depending on where you live you might be able to work outside.
You need didymium glasses.
You need a way to slowly cool your beads, unless you already have a kiln. I sometimes use a crock pot filled with “annealing bubbles” (which don’t actually anneal). You can also use vermiculite but it’s messy and the dust is nasty. Some use a fiber blanket. You could make a bunch, then arrange to have them batch annealed. They would have to be pretty small to survive until they can be annealed.
You need mandrels and bead release. You could stand them up in a jar of sand to let them dry.
I think I would buy an assortment of effetre pastel and transparent rods. They will be labeled individually and you can keep the labeled short ends for future reference. Avoid alabastro and opalino. And I would buy more (maybe 1/4 pound each?) of black, white, clear, and dark ivory.
You don’t need a lot of tools. Definitely a graphite marvel, inexpensive needle nose pliers.
I’m probably forgetting some things...
It would pay to do some online research about pricing, and watch for sales or free shipping. Frantzartglass.com and Howacoglass.com are 2 vendors I often use.
Hope this helps a bit. I honestly don’t know what it would cost to get set up now.
__________________
Roberta
”If it makes you happy, then it’s a good thing.” ~ Terryd
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2018-10-26, 3:38pm
|
|
dances with ideas...
|
|
Join Date: Sep 15, 2005
Location: A map dot in Montana
Posts: 2,356
|
|
Great links, Lorraine!
__________________
Roberta
”If it makes you happy, then it’s a good thing.” ~ Terryd
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2018-10-26, 5:04pm
|
|
Senior Member
|
|
Join Date: May 27, 2009
Posts: 418
|
|
The Idea to take a class first at an established studio is a great suggestion. It gives you a chance to test tools, play with different kinds of glass and see a proper set up before getting started.
I took a class then set up a hot head with a chili pepper kiln, bought a small number of tools and a basic glass assortment.
From there I expanded to a full setup within the first year I started. It can be a large investment up front but once you’re set up all your equipment should last many years.
__________________
Christina - CCGlassArt To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Handmade Murrini Chips, Glass Beads, & Lampwork Tutorials
|
2018-10-27, 7:20am
|
Dix Harrison
|
|
Join Date: Mar 31, 2009
Location: KCKS - But my heart is in Scotland
Posts: 526
|
|
I would like to add the following...
From a practical standpoint, you can almost always sell any outgrown equipment.
You can learn more and move up to a new torch or new tools when you are ready.
Sell the old ones to another beginner.
__________________
“Cometh the hour. Cometh the women.”
Facebook: Kansas Sky Studio Dix Harrison
|
2018-10-27, 4:10pm
|
Senior Member
|
|
Join Date: Feb 03, 2006
Posts: 179
|
|
I'd also check the library for any lampworking books, some of them provide a lot of basic and start-up information for the beginner.
__________________
"And those who were seen dancing were thought to be insane by those who could not hear the music."
FRIEDRICH NIETZSCHE
|
2018-10-28, 6:53am
|
|
Dazed and Confused
|
|
Join Date: Jan 10, 2007
Location: Los Angeles, via London
Posts: 288
|
|
Hi, and welcome!
I'll echo everyone else in saying that taking a basic beadmaking class is probably your best initial money outlay. You'll have a chance to see a basic beadmaking setup, and you'll also be able to ask your instructor what kinds of setups they would recommend.
Plus, when it actually comes to making your first bead, having someone there to physically guide you through the steps and closely monitor your actions is invaluable.
Youtube is a wonderful tool - I'm always looking up new stuff - but having an actual human being, literally guiding your hand if needs be, is something Youtube just can't do (yet!).
I started out in my garage with a Hothead and a thick fibre blanket folded over as an 'annealer' - and the only tools I ended up using for the longest time were a brass marver, an old butter knife and a steel pick in a handle.
I only started getting better equipment and a more powerful torch when I became interested in working with borosilicate glass and my old Hothead couldn't do the job. But I still find my most trusty tools are... my old brass marver, an old butter knife and a titanium pick in a handle
There's a temptation at the beginning to buy all sorts of fancy tools - I know I did, and theres still some bead-rollers I've only used a couple of times in my toolkit 0.o. But almost all bead making techniques involve gravity, timing and the application of glass - so unsurprisingly its pretty easy to get away with a simple toolkit like a cutter/scorer, a poker/plunger and a small shaper on a handle.
Anyway good luck! I'd love to pix of your setup once you've done it?
__________________
Cats prefer plain crisps
|
2018-10-28, 8:19pm
|
Junior Member
|
|
Join Date: Oct 19, 2018
Posts: 9
|
|
Great information!! Exactly the kind of responses I was looking for. Quick question. Is a kiln necessary at the start? I see that a chili pepper kiln is in the $700 range. There seems to be a fair amount of opportunity to take classes in the Seattle area. Prices seem to fluctuate a little. Any suggestions on classes? Lorraine, thank you for the links. They are very helpful! Thank you everyone who has responded so far!
|
2018-10-28, 8:49pm
|
Junior Member
|
|
Join Date: Oct 19, 2018
Posts: 9
|
|
Lorraine, thank you for the link to your thread about costs. That was very informative and eye opening. It makes a person think about what may lay ahead, and that is very good information to have. There definitely is a cost associated with any hobby/job and the linked thread did a great job of describing a lot of it. There is also some joy and satisfaction deemed from making something beautiful with your own hands.
|
2018-10-29, 12:01pm
|
|
dances with ideas...
|
|
Join Date: Sep 15, 2005
Location: A map dot in Montana
Posts: 2,356
|
|
You can get away without your own kiln at first, but the beads will have to be small, definitely less than 1 inch. Also, they are not truly done until they are properly annealed in a kiln.
Check for classes at Pratt Fine Arts Center. The instructors are top notch and after you know what you’re doing you can become eligible to rent studio space.
__________________
Roberta
”If it makes you happy, then it’s a good thing.” ~ Terryd
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2018-10-30, 6:42am
|
Junior Member
|
|
Join Date: Oct 19, 2018
Posts: 9
|
|
Thank you for the info!
|
2018-10-30, 9:33am
|
|
Senior Member
|
|
Join Date: Mar 28, 2016
Posts: 315
|
|
I believe there should be a place for creativity in every home. It costs, but the sense of accomplishment is priceless. Happy lampworking, just take care of yourself !
|
2018-10-30, 10:02am
|
|
Senior Member
|
|
Join Date: Aug 31, 2006
Location: Knoxville, TN
Posts: 2,215
|
|
You can likely find a used kiln in your area. Lots of glass going on there.
__________________
Kathy
|
2018-10-30, 6:44pm
|
|
I'm meeeeelting
|
|
Join Date: May 27, 2007
Location: Seattle, WA
Posts: 2,236
|
|
I'd also suggest you take a beginner class at the Pratt Fine Arts Center. www.Pratt.org
They also have a studio rental program. It requires a membership ($75 a year). After taking a class or two, you can sign up for an orientation and then for an access test. Once you pass the test, you can rent at a far less expensive price than I've seen anywhere else, including use of torch and kiln. It's a great way to get started and see what you like and need. It's also a great way to meet other glass folks and be a part of an awesome community. My closest friends are gals I met through Pratt.
__________________
Etsy: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Foot Pedal Tutorial: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Kevlar Fingerless Gloves: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2018-10-31, 7:29am
|
Junior Member
|
|
Join Date: Oct 19, 2018
Posts: 9
|
|
Thank you! I have been looking at Pratt for a while now. I just need to bight the bullet!!
|
2018-11-01, 7:54pm
|
|
dances with ideas...
|
|
Join Date: Sep 15, 2005
Location: A map dot in Montana
Posts: 2,356
|
|
You won’t regret it.
__________________
Roberta
”If it makes you happy, then it’s a good thing.” ~ Terryd
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 4:54am.
|