|
Tips, Techniques, and Questions -- Technical questions or tips |
2015-03-24, 8:37pm
|
|
Marble Lover
|
|
Join Date: Apr 16, 2012
Location: Broken Arrow, OK
Posts: 802
|
|
Crack in a boro tube
I ordered some boro tubing and it arrived with some slight damage. One tube had about a 4-inch piece on the end cracked off - no big deal, I can fix that one.
The other tube that got damaged is the one I have a question about. The very end of it got damaged and left about a 1-inch crack going down the side of the tube.
I want to fix it without having the crack run down the tube further. What is the best way to do this? By "fix it" I just mean salvage the tube without breaking the whole thing.
Thanks,
-BEP (who is new to tubing)
__________________
Brian E. Parker aka BEPNewt
Lifelong glass lover, now getting to work with it. Using a Bravo on an M20 & Natural Gas ( inner ), Tanked O2 & Propane ( outer ).
Grew up near To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. .
|
2015-03-24, 9:41pm
|
Senior Member
|
|
Join Date: Mar 07, 2011
Location: Northern California
Posts: 2,023
|
|
Score and crack that broken end off. Wet the scored line and then touch it with the end of a hot rod. Should pop right off.
|
2015-03-25, 3:17am
|
|
kinda torching....
|
|
Join Date: Mar 26, 2013
Location: Pennsylvania
Posts: 301
|
|
Only other option besides what Larry said, is to chase the crack whicvg is just a risky big pain in the ass! lol
__________________
Jeremy To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2015-03-25, 4:21am
|
|
Phill
|
|
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
|
|
Is it possible to heat the tube below the crack and then run the heat back toward the crack to heal it and continue to soften it and heal it back to the end?
__________________
The Zombie Apocalypse is Upon Us.
|
2015-03-25, 5:39am
|
|
hyperT
|
|
Join Date: Jan 31, 2013
Location: San Antonio, Texas
Posts: 582
|
|
Crack
Warm the tube up very slowly, sometimes it will heal itself. If not, after it is warmed well you can use more heat but not a lot until it heals.
Hit it with more heat for a second or so then remove the heat then hit it again until the crack closes up.
If it weren't on the end I would suggest a slight vacuum like from a water faucet to help keep it pulled together and seal it.
|
2015-03-25, 7:47am
|
Junior Member
|
|
Join Date: Jul 18, 2014
Posts: 3
|
|
I would like to know the standard temp. to warm up my chipped flower before trying to re-attach my petal in the flame. I guess I'm asking for a standard temp. for garaging in the kiln. I've had trouble with annealing what appears to be a perfect flower (rose). When I remove it from the kiln, a leaf or petal will fall off. Then, when I warm the piece back up to re-attach the petal, It will sometimes fall apart in the flame.
Wonder if I'm making any sense? Has anyone ever experienced this?
|
2015-03-25, 8:14am
|
|
Marble Lover
|
|
Join Date: Apr 16, 2012
Location: Broken Arrow, OK
Posts: 802
|
|
The end of the tube is jagged and the crack isn't that long so I'm going to go with the score, wet, and heat method mentioned by Larry. I've seen that done and am comfortable giving it a go. I'm only losing a little more than an inch of product and that should give me a clean end to work with.
I'll give it a try soon. I appreciate everyone's input and will keep the other methods in mind as I work more with tubing.
I'm pulling my first points so I can attempt some ornaments. I've watched enough videos and read enough about it - it's time to actually give it a shot.
Thanks, Folks,
-BEP
__________________
Brian E. Parker aka BEPNewt
Lifelong glass lover, now getting to work with it. Using a Bravo on an M20 & Natural Gas ( inner ), Tanked O2 & Propane ( outer ).
Grew up near To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. .
|
2015-03-25, 2:53pm
|
Senior Member
|
|
Join Date: Mar 07, 2011
Location: Northern California
Posts: 2,023
|
|
Quote:
Originally Posted by bepnewt
The end of the tube is jagged and the crack isn't that long so I'm going to go with the score, wet, and heat method mentioned by Larry. I've seen that done and am comfortable giving it a go. I'm only losing a little more than an inch of product and that should give me a clean end to work with.
I'll give it a try soon. I appreciate everyone's input and will keep the other methods in mind as I work more with tubing.
I'm pulling my first points so I can attempt some ornaments. I've watched enough videos and read enough about it - it's time to actually give it a shot.
Thanks, Folks,
-BEP
|
Pictures!
Mind if I ask who you bought from? Used to have damage myself until I switched to mountain glass. MGAs packing is the best I have found.
|
2015-03-25, 2:58pm
|
Senior Member
|
|
Join Date: Mar 07, 2011
Location: Northern California
Posts: 2,023
|
|
Quote:
Originally Posted by lory
I would like to know the standard temp. to warm up my chipped flower before trying to re-attach my petal in the flame. I guess I'm asking for a standard temp. for garaging in the kiln. I've had trouble with annealing what appears to be a perfect flower (rose). When I remove it from the kiln, a leaf or petal will fall off. Then, when I warm the piece back up to re-attach the petal, It will sometimes fall apart in the flame.
Wonder if I'm making any sense? Has anyone ever experienced this?
|
Not related to this thread really but it sounds like your welds for the petals are not good. Those welds need to be blended in well at a sufficiently high temp so that there are no sharp edges or angles. There must be a smooth profile. I garage everything when I am working at 950 and anneal at 1050.
|
2015-03-25, 5:29pm
|
|
Marble Lover
|
|
Join Date: Apr 16, 2012
Location: Broken Arrow, OK
Posts: 802
|
|
Quote:
Originally Posted by LarryC
Pictures!
Mind if I ask who you bought from? Used to have damage myself until I switched to mountain glass. MGAs packing is the best I have found.
|
I planned on trying tonight, but we have tornados in the area. The Wife put her foot down when I went in the garage to work with glass while the sirens were going off and clouds rotating overhead. Pics as soon as I can.
I got the tubing at TrevsGlass.com. Phyllis noticed on here that I was looking for a small amount of medium-wall tube at an affordable price and worked with me to figure out exactly what I needed. Both ends of the box were smashed up where the carrier must have dropped it pretty hard every chance they got. Based upon the appearance of the box, I was impressed that out of all the tubes, only 2 had small issues. If I buy more, I'll go back to them again. I'll mention the 2 broken tubes at that time and have them pad the ends a little more.
-BEP
__________________
Brian E. Parker aka BEPNewt
Lifelong glass lover, now getting to work with it. Using a Bravo on an M20 & Natural Gas ( inner ), Tanked O2 & Propane ( outer ).
Grew up near To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. .
|
2015-03-25, 7:19pm
|
Senior Member
|
|
Join Date: Mar 07, 2011
Location: Northern California
Posts: 2,023
|
|
Quote:
Originally Posted by bepnewt
I planned on trying tonight, but we have tornados in the area. The Wife put her foot down when I went in the garage to work with glass while the sirens were going off and clouds rotating overhead. Pics as soon as I can.
I got the tubing at TrevsGlass.com. Phyllis noticed on here that I was looking for a small amount of medium-wall tube at an affordable price and worked with me to figure out exactly what I needed. Both ends of the box were smashed up where the carrier must have dropped it pretty hard every chance they got. Based upon the appearance of the box, I was impressed that out of all the tubes, only 2 had small issues. If I buy more, I'll go back to them again. I'll mention the 2 broken tubes at that time and have them pad the ends a little more.
-BEP
|
What!?!? Its just a tornado!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 3:54am.
|