connections in studio.

Rose Leslie · #1 2006-12-17, 6:30pm

I'm putting up the insulation in the studio on the walls. I have to put the exhaust fan ducting in before the one area is covered. What do I put over the out side vent area. I was thinking about some thing with mesh. But would like to have something close when not in use. Any ideas. Also I need to put in a couple of PVC pipes to put the air hose though or something. Help again. I don't want to finish up an area when I have to take it down again. Any ideas. Photos of this would be great also if you have them. Thanks in advance. You all are great.

artwhim · #2 2006-12-17, 11:23pm

Rose, are you using an 8" pipe? If so I'll try to locate a picture of what I used. It works great. Has a self closing flap and when I installed it, I added a screen to keep mice/bugs out. I think they come in different sizes too. I'll go look.

artwhim · #3 2006-12-17, 11:34pm

Here is a link to the one I have.
http://www.airshack.com/Merchant2/me...de=DC-WallCaps
I bought mine on ebay for thirty something. You may be able to find a better solution, but I was limited due to my setup. The door easily swings open when the fan is in use. I don't feel a draft when the fan isn't on.

When will your shed be ready to use?

Rose Leslie · #4 2006-12-18, 6:32am

Thank you. I bought the vent for the studio that every one has. Now it is the out side that I need. Yes this is something that I have to do next. It is eight inches. Thanks for the link.