|
Tips, Techniques, and Questions -- Technical questions or tips |
View Poll Results: Do you use your marver to shape your beads?
|
Oh yeah! i marver the heck outta them!
|
|
98 |
50.26% |
I sometimes marver but mostly use heat & gravity
|
|
76 |
38.97% |
i rarely marver, just use heat and gravity
|
|
20 |
10.26% |
i don't use my marvers, i use custom forming tools
|
|
6 |
3.08% |
What's a marver?
|
|
2 |
1.03% |
2009-11-25, 11:38am
|
|
burnin' glass just becuz
|
|
Join Date: Apr 16, 2006
Location: Ottawa, Canada
Posts: 1,251
|
|
Do you marver your beads?
I taught a beginner class recently for another instructor and realized as i was explaining basic shaping that in general i don't marver my beads (meaning i don't use those flat rectangular paddles or clamped on blocks made of steel, brass or graphite to shape the bead)
I found myself struggling a bit to show them how to shape with a marver cuz at home i mostly use heat and gravity to shape my beads. plus i have custom forming tools or i just roll or press them on the tile on my worktable - a likely very bad habit i figured i probably shouldn't teach a beginner class...
i've seen videos and demos where other lampworkers were carefully touching the molten glass to the marver at various points of the shaping process but that's not how i started (being self taught) so my marvers always have (and still do) sit flat on my work table and just hold whatever i'm going to be adding to the bead, e.g. frit, foil, murrini, etc.
So here's my question: Am i the only one who doesn't marver my beads? All you other non-marverers what do you do?
__________________
Evelyn - Carlisle Lucio w/ 8lpm EX-15 To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Give ideas away - there are new ones underneath... Diane Vreeland
|
2009-11-25, 12:38pm
|
|
I speak Murrini!
|
|
Join Date: Oct 12, 2006
Location: In a Glass House, CA
Posts: 9,170
|
|
I use my marver to gently shape in the beginning of creation; I rarely use it to completely shape, though - just to touch up sides, flatten before encasing, etc.
I definitely use it EVERY TIME I TORCH, and would be lost without it while doing my layer-after-layer of encased Ocean beads. It definitely helps me keep control.
Further, I use my hand-held a lot - and bring it up to my work and pull the bead out of the flame just a bit and marver it right there at the back of the flame. Maybe it's because I'm on the Hot Head and don't trust the heating sufficiently to move it away from the heat long enough to marver too much on my work bench for fear of over cooling it!
So.....I use MOSTLY like this:
and this:
And sometimes like this:
De
__________________
~DeAnne~
I've got a murrini for that,'ya know! To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
"Only a fool rushes to his own demise..." ~Zorro
|
2009-11-25, 12:42pm
|
|
Lampworkaholic!
|
|
Join Date: Apr 22, 2008
Location: Cornelius, NC - because weather
Posts: 5,158
|
|
If you are using forming tools or pressing your glass on tile, then technically I would say you are marvering. I have a love-hate relationship with marvering tools. I make lots of round or donut shapes so I don't have to marver, but I also love cylindar shapes which are essentilly impossible without marvering, at least for me. I consider myself press-challenged but I have recently fallen in love with graphite beadrollers, which could be considered marvers too. One of the best marvering tips I ever got was to treat your marvering paddle like an airplane landing strip, in other words, roll your bead down the length of the marver rather than spin it in place. I just got Andrea Guarino's large marver which is awesome - it has a notch for shaping the ends of your beads.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
"And all will turn to silver glass, a light on the water, grey ships pass into the west." Annie Lennox
|
2009-11-25, 1:33pm
|
|
burnin' glass just becuz
|
|
Join Date: Apr 16, 2006
Location: Ottawa, Canada
Posts: 1,251
|
|
Quote:
Originally Posted by erose
If you are using forming tools or pressing your glass on tile, then technically I would say you are marvering. I have a love-hate relationship with marvering tools. I make lots of round or donut shapes so I don't have to marver, but I also love cylindar shapes which are essentilly impossible without marvering, at least for me. I consider myself press-challenged but I have recently fallen in love with graphite beadrollers, which could be considered marvers too. One of the best marvering tips I ever got was to treat your marvering paddle like an airplane landing strip, in other words, roll your bead down the length of the marver rather than spin it in place. I just got Andrea Guarino's large marver which is awesome - it has a notch for shaping the ends of your beads.
|
yes, technically you can marver with any tool... however for the purposes of this exercise i'm referring specifically to those square or rectangular blocks of steel, brass or graphite, etc. that are commonly referred to as marvers and are designed specifically for this purpose. most times they are either attached to the torch or have a handle.
i've never developed a comfortable way of using them and wondered if anyone esle was in my shoes...
__________________
Evelyn - Carlisle Lucio w/ 8lpm EX-15 To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Give ideas away - there are new ones underneath... Diane Vreeland
|
2009-11-25, 1:57pm
|
|
Senior Member
|
|
Join Date: May 04, 2007
Location: San Jose, CA
Posts: 1,212
|
|
Perhaps it's a question of nomenclature, but I consider a 'marver' as either mounted to the torch, or laying flat on the bench. If it's in my hand (with a handle), it's a paddle.
Or a Kote, if you prefer one of the Japanese tools. Or a Stump Shaper, or a ...
Which raises the question: Do you marver with a paddle?
Malcolm
__________________
ARTCO
Artist's Reliable Tool Company
Website: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Email: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Phone:+1.408.288.7978
|
2009-11-25, 2:02pm
|
|
Critter Mom
|
|
Join Date: Dec 31, 2007
Location: Coquille, Oregon
Posts: 2,496
|
|
I'm gonna vote "marver the heck outta them", because I use the marver almost every time I make a bead...but, I don't think I actually "marver the heck outta them". I use the marver to get and keep my basic shape thoughout the process of laying down layers of color and for keeping little critter feet level. The only time I don't marver beads is when I make little spacers.
__________________
Bonnie
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-25, 2:49pm
|
|
burnin' glass just becuz
|
|
Join Date: Apr 16, 2006
Location: Ottawa, Canada
Posts: 1,251
|
|
Quote:
Originally Posted by ArtcoInc
Perhaps it's a question of nomenclature, but I consider a 'marver' as either mounted to the torch, or laying flat on the bench. If it's in my hand (with a handle), it's a paddle.
Or a Kote, if you prefer one of the Japanese tools. Or a Stump Shaper, or a ...
Which raises the question: Do you marver with a paddle?
Malcolm
|
LOL, i'm including paddles (and Kotes, stump shapers, etc) as "marvers" for this survey...
funny thing is one of the first items i bought was a brass stump shaper and i maybe used it once... i'm not even sure where it is anymore.
i bought an extra long brass paddle thinking i would roll beads up and down it to shape - nope, it just lies flat on my table and is mostly used for big pieces of leaf or foil.
then earlier this year i bought two sizes of graphite paddles after i read they were "better" cuz they don't pull as much heat from the glass - first thing i ended up doing was removing the handle from the big one cuz i found it too cumbersome and now it lies flat on my table as well for frit (lol). and the only time i ever use the little one is to occasionnally touch up the ends of a bead the odd time that it doesn't droop evenly.
__________________
Evelyn - Carlisle Lucio w/ 8lpm EX-15 To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Give ideas away - there are new ones underneath... Diane Vreeland
|
2009-11-25, 5:02pm
|
|
Formerly FishBulb
|
|
Join Date: Dec 05, 2008
Location: Pony Flower Princess Land
Posts: 2,772
|
|
I voted the second one. I use heat and gravity more than the marver, but I do need the marver once in awhile as well.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
In Soviet Russia, Google searches you.
|
2009-11-25, 7:51pm
|
|
And silence is golden
|
|
Join Date: Oct 05, 2005
Location: The Shrimp Shack
Posts: 3,230
|
|
DE! Nice glass color! What is it?
|
2009-11-26, 10:06am
|
|
Bigger, longer, and uncut
|
|
Join Date: Aug 01, 2007
Location: Fort Collins, CO
Posts: 447
|
|
It depends on the bead whether I marver or not.
If I make a round or olive shape, I form using heat and gravity (learned from Jim Smircich).
When I make my usual long bicone or tube beads, I use heat and gravity to center the glass on the mandrel, THEN I marver the heck outta them on my 6-by-12-inch graphite slab (learned from Trey Cornette) to shape the middle and to make nice, dimpled ends.
I never could get the hang of a handheld graphite paddle.
__________________
Evelyn
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-26, 1:18pm
|
|
Goddess
|
|
Join Date: Jul 12, 2005
Location: Germany
Posts: 3,033
|
|
Depends on the shape of course, but I do use a torch mounted marver as well as a paddle quite often. If you can get perfect ends or make a nice crisp bicone for example, without marvering, then more power to ya!...in many cases, I can't...I need to touch up those ends, at least a bit.
__________________
Teresa To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ** To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ** To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ** To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ** To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-26, 5:08pm
|
|
I speak Murrini!
|
|
Join Date: Oct 12, 2006
Location: In a Glass House, CA
Posts: 9,170
|
|
Quote:
Originally Posted by ArtcoInc
...Which raises the question: Do you marver with a paddle? Malcolm
|
Watch it, or I just may paddle you with my marver!
__________________
~DeAnne~
I've got a murrini for that,'ya know! To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
"Only a fool rushes to his own demise..." ~Zorro
|
2009-11-26, 7:06pm
|
|
More ideas than talent
|
|
Join Date: Sep 17, 2005
Location: Melbourne, Oz
Posts: 2,565
|
|
I usually just use heat as well (which is probably why my beads are donut shaped or pressed usually).
For the longest time, I just didn't understand how marveering or paddling worked. It finally made sense when I took a Jim Smirich class. I still don't do it very often though.
__________________
Wendy
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-26, 9:38pm
|
|
Scientific Glass Girl
|
|
Join Date: Oct 30, 2005
Location: Seattle, WA
Posts: 5,138
|
|
sometimes i worry about showing people the marver i use.. it is beat the hell up.. five years of beads/scientific glass have really done it in. i once had someone tell me they didn't know why there wasn't a huge groove in my marver from making large bicone beads.. like the graphite wasn't just wearing down.
__________________
Ali VandeGrift
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-27, 9:41am
|
|
I fart diamonds
|
|
Join Date: Jun 14, 2005
Location: Altamonte Springs, FL
Posts: 3,893
|
|
Quote:
Originally Posted by LavenderCreek
Depends on the shape of course, but I do use a torch mounted marver as well as a paddle quite often. If you can get perfect ends or make a nice crisp bicone for example, without marvering, then more power to ya!...in many cases, I can't...I need to touch up those ends, at least a bit.
|
Ok. How do you make a bicone without marvering? I'd love to see that!
__________________
-Shawnette the original "everybody get a grip" girl
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-27, 11:45am
|
|
Puddy Cat Lover
|
|
Join Date: Nov 04, 2005
Location: DeMotte, IN
Posts: 1,592
|
|
This is a marverlous thread! HeeHee
I marver. I use my torch mounted marver alot. I use my graphite pad alot, I use my paddles, alot.
So, for those of you who checked, What's a marver? Here's the Wikopedia definition: http://en.wikipedia.org/wiki/Marver
J.
__________________
Jeanette Savina Cobb
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. *
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-27, 11:56am
|
Mary Lockwood
|
|
Join Date: Jun 21, 2005
Location: Boonies
Posts: 5,831
|
|
I vote same as Kimberly.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-27, 12:45pm
|
|
Goddess
|
|
Join Date: Jul 12, 2005
Location: Germany
Posts: 3,033
|
|
Quote:
Originally Posted by shawnette
Ok. How do you make a bicone without marvering? I'd love to see that!
|
Me too Shawnette!
__________________
Teresa To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ** To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ** To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ** To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ** To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-27, 3:52pm
|
|
one day at a time
|
|
Join Date: Jun 27, 2005
Location: We are MOVING!!!
Posts: 8,319
|
|
I never marver, it's all about heat and gravity for the beads I make. (traditional rounds) But I marver barrels and long bead shapes, of course.
__________________
You live in a world of money. Money means choices. No money, no choices. Welcome to reality.
Melody (Marlee Matlin) from Switched at Birth
|
2009-11-27, 9:25pm
|
|
burnin' glass just becuz
|
|
Join Date: Apr 16, 2006
Location: Ottawa, Canada
Posts: 1,251
|
|
Quote:
Originally Posted by shawnette
Ok. How do you make a bicone without marvering? I'd love to see that!
|
LOL, me three! for me that's where the custom tools come in. i have these grooved brass hand tools (not flat) that i use for shaping - i''ve never quite been able to get the hang of fully shaping a bead by rolling it on a completely flat surface... touch-ups sure but not complete shaping
my 2nd fave "marvering" tool is the top half of the Cattwalk crunch presses
__________________
Evelyn - Carlisle Lucio w/ 8lpm EX-15 To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Give ideas away - there are new ones underneath... Diane Vreeland
|
2009-11-28, 9:09pm
|
|
Covered in glitter
|
|
Join Date: Jun 16, 2005
Posts: 15,680
|
|
I used it some with soft glass unless I'm making round beads. I generally do round with just heat and gravity. I never use the marver if I'm doing boro.
__________________
~Deb~
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
And those who were seen dancing were thought insane by those who couldn't hear the music. --Nietzsche
|
2009-11-29, 6:07am
|
|
state-eternal change
|
|
Join Date: Sep 09, 2006
Location: Sunnyvale CA
Posts: 710
|
|
I use both a hand marver and a torch-mounted marver. My favourite hand marver (paddle) is a small light graphite marver that's about two inches square, mounted on an aluminum handle and is thin. I have a top mounted marver for my minor which I love (has a little "shelf" in the front which is perfect for my "template" beads). I've been using a top mount on a mini CC lately, and I'm not so fond of it, as it has rather large metal prongs coming up the sides that get in the way of my hands when I'm rolling out a barrel that's on a shorter mandrel. The mini cc marver has a little shelf too which is very handy.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-29, 10:50am
|
|
Senior Member
|
|
Join Date: Jun 27, 2005
Location: Yarmouth, Maine...home of the Clamfest
Posts: 7,693
|
|
Quote:
Originally Posted by ewdb
LOL, me three! for me that's where the custom tools come in. i have these grooved brass hand tools (not flat) that i use for shaping - i''ve never quite been able to get the hang of fully shaping a bead by rolling it on a completely flat surface... touch-ups sure but not complete shaping
my 2nd fave "marvering" tool is the top half of the Cattwalk crunch presses
|
ME TOO!!! I tell EVERYONE to buy this press!!! I can't torch without it!! It's my FAVORITE MARVER!! (I even take it with me when I go other places to torch!)
My other "must haves" are my brass "center handled" square from Maria (I like the plate of brass with a handle like a press--I can "squish" with it or I can use it like I do the crunch press top!!), & the matching flat plate that sits on the counter top....I really like brass better than graphite 90% of the time...oh & a teeny little brass shaper from GLMcBead....& some pokers from Maria, & a brass "cuticle shaper" from Nikki's Brian (the official "sheep-ear poker-downer" )
My poor "must have if you're a new torcher" graphite marver still looks brand new...I must find my dremel & drill a hole in it--Sue keeps telling me what a great "mandrel steadier" they make....maybe I'd use it then.... I feel bad just looking at it!
__________________
And if I laugh at any mortal thing, ‘Tis that I may not weep...” ~Lord Byron
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
new purple cricket @ home! minicc @ playing with fire in rockland! Sue & Nikki fighting over who gets to anneal the wonkies To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-29, 7:40pm
|
|
Born Facing Left
|
|
Join Date: Jun 13, 2005
Location: 1865 Miles Southeast of Dutch Harbor
Posts: 2,829
|
|
I do a lot of marvering with a 7/8 lentil press. Even on huge beads. And the ends of mag's mashers are pretty handy, too. I use a Japanese Kote for marvering bicones and such.
__________________
Sherry
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-29, 7:51pm
|
|
Senior Member
|
|
Join Date: Jul 01, 2005
Location: Ohio
Posts: 7,458
|
|
Rounds I let shape themselves, anything else (tubes, barrels, olive shapes) I marver with my graphite paddle, Obsidin (sp?) lentil shaper, or Perfect Tool radial cone shaper.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ~: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. :~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ~: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. :~ Nikki ~: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. :~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ~: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. :~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
"...living hopefully ever after..." -john lennon
|
2009-12-01, 3:05pm
|
|
Senior Member
|
|
Join Date: May 23, 2006
Posts: 5,540
|
|
Me too on the lentil press. I have an Osibin lentil shaper that I couldn't live without. Don't use it for making lentils though. I have never seen the need to marver a round object on a flat surface, unless of course you flatten your bead. Most of my shaping is done in the flame with a tad bit of shaping with my lentil paddle.
__________________
Cynthia
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-12-02, 7:59pm
|
|
Unmedicated since '62
|
|
Join Date: Jan 18, 2009
Location: Hunter Valley, Australia
Posts: 5,907
|
|
i never used to till i started makeing long tubes then i had to literally dust it off to use it
__________________
Deb
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. - my 17yo sons first novel
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. - download, get organised, enjoy
|
2010-03-26, 9:57pm
|
|
Senior Member
|
|
Join Date: Jan 27, 2010
Location: Saint Paul, MN
Posts: 261
|
|
Quote:
Originally Posted by RetiredinCoquille
I'm gonna vote "marver the heck outta them", because I use the marver almost every time I make a bead...but, I don't think I actually "marver the heck outta them".
|
My reasoning was pretty close to this, but since I could choose two boxes I chose the first two, because I'm somewhere in-between.
I use my marver/paddle to help refine edges, flatten sides (like for tubes or cones), smooth out places where I had too much glass in a press ... lots of little uses. As an artist I'm continually developing my awareness that ones artistic expression is often closely tied to refinement of tool use. So, if you learn with a marver, you're always learning new ways to put it to use, but it's not like you're just using it to mash (!) the glass around because you don't know how to do anything else!
__________________
Julie
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-03-27, 6:41am
|
|
Karen James
|
|
Join Date: Mar 22, 2006
Location: Rhode Island
Posts: 599
|
|
Quote:
Originally Posted by glassactcc
Me too on the lentil press. I have an Osibin lentil shaper that I couldn't live without. Don't use it for making lentils though. I have never seen the need to marver a round object on a flat surface, unless of course you flatten your bead. Most of my shaping is done in the flame with a tad bit of shaping with my lentil paddle.
|
Ditto! I bought the lentil press to make lentils. Then while I was searching out how to use it I found some great info on how to use it to shape beads. I use it for that more than anything now.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. Karen To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Cricket, Mini CC, Devilbiss MC84 Oxy and NG
|
2010-03-29, 11:09pm
|
|
Fire Monkey
|
|
Join Date: Jul 01, 2005
Location: at the edge of reason
Posts: 3,264
|
|
I love my graphite Osibin shapers from Arrow Springs!
I have several and use them frequently.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 8:34pm.
|